Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
- Power supply system and production of the fulfilled gases
General information and security measures
Sbrasyvaniye of pressure in fuel system
+ Power supply system of petrol engines
+ Power supply system of the diesel V6 engine
- Systems of release and decrease in toxicity of the fulfilled gases
General information
Removal and installation of components of system of release of OG
Removal and installation lambda probes
Removal and installation of components of SAI system
Removal and installation of components of EVAP system
Removal and installation of the valve and EGR system tube
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Removal and installation lambda probes
Engines of 2.0 l
|
|
|
|
- Remove the top cover of the engine and separate sockets of the CKP sensor and a lambda probe.
|
|
|
- Accurately take away electroconducting a lambda probe aside and turn out it.
|
|
|
Do not drop a lambda probe. |
- Installation is made upside-down. Grease its carving a lambda probe with means of Molycote 1000. Watch that electroconducting the lambda probe was not overwound.
|
|
Engines of 2.3 l
|
|
|
|
- Remove the top cover of the engine and separate sockets a lambda probes.
|
|
|
- At removal forward a lambda probe remove a perepuskny tube and the thermofilter (3 on an illustration), take aside electroconducting a lambda probe and turn out it from target a turbokompressor pipe.
|
|
|
- At removal forward a lambda probe liberate electroconducting a lambda probe, поддомкратьте the car and turn out a lambda probe.
|
- Installation is made upside-down. Grease its carving a lambda probe with means of Molycote 1000. Watch that electroconducting the lambda probe was not overwound.
|
|
Petrol V6 engines
|
|
|
|
- Separate the socket a lambda probe and поддомкратьте the car.
|
|
|
- Cut electroconducting couplers a lambda probe, previously having remembered a route of its laying, and remove a lambda probe.
|
- Installation is made upside-down. Grease its carving a lambda probe with means of Molycote 1000. Watch that electroconducting the lambda probe was not overwound.
|
|
|
|