Saab 9-5

since 1997 of release

Repair and car operation


Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
- Engine
   General information and preparatory operations
   Check of kompressionny pressure
   Engine check by means of the vacuum gage
   + Repair of 4-cylinder petrol engines
   + Repair of 6-cylinder petrol engines
   - Repair of 6-cylinder diesel engines
      Removal and installation of heads of cylinders and driving belts
      Removal and installation of a back cover of a belt of a drive of GRM
      Check of klapanny gaps
      Removal and installation of pallets of a case
      Check of pressure of impellent oil
      Removal and installation of the power unit
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Removal and installation of a back cover of a belt of a drive of GRM

The description of removal and installation of a belt of a drive of GRM and its lobby of a cover is provided in the Section Removal and installation of heads of cylinders and driving belts.


 PERFORMANCE ORDER

  1. Remove a belt of a drive of GRM.
  2. Turn out a stopper over a cogwheel of TNVD and screw the M6 screw to fix it.
  1. Remove TNVD cogwheel (22 on an illustration), a pulley (23) cranked shaft and separate the CKP sensor socket (24).
  1. Remove a back cover of a belt of a drive of GRM, take from it epiploons and clear its interfaced surfaces of prokladochny materials.
  1. Remove from a cranked shaft a rotor of the CKP sensor and two intermediate gear wheels of TNVD.
  1. Establish gear wheels of a drive of TNVD so that labels on them coincided.
  1. Establish acting in film components in sequence, return sequence of dismantle of components. At installation of a back cover of a belt of a drive of GRM put on its interfaced surfaces hermetic (No. 87 81 841 according to the Saab catalog).