Saab 9-5

since 1997 of release

Repair and car operation


Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
- Engine
   General information and preparatory operations
   Check of kompressionny pressure
   Engine check by means of the vacuum gage
   + Repair of 4-cylinder petrol engines
   - Repair of 6-cylinder petrol engines
      Reduction of the piston of the first cylinder in situation VMT and replacement of a belt of a drive of auxiliary units and its natyazhitel
      Removal and installation of the inlet pipeline, belt of a drive of GRM and heads of cylinders
      Dismantling and assembly of the klapanny mechanism
      Replacement of epiploons of a cranked shaft
      Removal and installation of the pallet of a case and maslootrazhatelny plate
      Replacement of the oil pump and its valves
      Replacement of the perepuskny valve of system of greasing of the engine
      Removal and installation of the power unit
   + Repair of 6-cylinder diesel engines
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Replacement of the perepuskny valve of system of greasing of the engine

 PERFORMANCE ORDER

  1. To Poddomkratta the car also lower impellent oil.
  1. Uncover (2 on an illustration) the perepuskny valve.
  1. Cut in a face plate carving М10, screw in it a bolt and extend the valve (1 on an illustration).

Metal shavings should not get inside.

  1. Oil the valve and establish it into place.
  2. Establish a valve cover with new consolidation.
  3. Lower the car on the earth and fill the engine with oil.
  4. Start the engine and make sure of absence of leakages of oil.