Saab 9-5

since 1997 of release

Repair and car operation


Saab 9-5
+ Saab 9-5 Cars
+ Governing bodies and operation receptions
+ Settings and routine maintenance of the car
+ Engine
+ Systems of cooling of the engine, heating, ventilation and air conditioning
+ the Power supply system and production of the fulfilled gases
+ Systems of electric equipment of the engine
+ Manual box of gear shifting
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
   General information
   Diagnostics of malfunctions of onboard electric equipment - the general information
   Safety locks - the general information
   The relay - the general information and check of serviceability of functioning
   Window regulators
   Podrulevye switches
   Combination of devices
   Removal and installation of lighting devices and replacement of their lamps
   Adjustment of an inclination of headlights
   Removal and installation of sensors of adjustment of an inclination of headlights
   Removal and horn installation
   Screen wipers and stekloomyvatel
   Sensors of system of the help at a parking
   Removal and installation of an audiosystem and loudspeakers.
   Removal and installation of components of SRS system
   Removal and installation of DICE and TWICE control units
   + electric equipment Schemes

Все о психологии на сайте АленаШик: https://alyonashik.ru

Removal and installation of DICE and TWICE control units

The description of removal and control unit installation by the engine (ECM) is described in the Section Removal and the ECM installation, and the SRS control unit – in the Section Removal and starter installation.


 PERFORMANCE ORDER

  1. At removal of the DICE block remove the bottom section of the dashboard from the driver, and also a cover of the block of safety locks.
  2. At removal of the TWICE block remove a seat of the driver (see. Head the Body) also unbend a carpet. If necessary remove a plastic molding.
  3. Separate the socket (3), turn out 2 screws (4) and remove the control unit (5).
DICE block removal.
TWICE block removal.